Feeds:
Posts
Comments

Posts Tagged ‘furniture’

John Mcbride  has this piece under construction as I write. I’ll post some more photos. It is intended to complement this tiled tub surround.

Read Full Post »

I’ve made progress on the prototype. The lid is installed. I fashioned a hinge out of retired spectra running rigging from the 5o5 Bar-ba-loot (pictured below). The hinge needs a little fine-tuning, but I like the Xs. I handcarved the curves in the lid.  Nice soft fir makes for easy carving.

Treasure chest Post 1 Treasure chest post 2

Read Full Post »

After gluing the box together, it needed some sanding.

——————————————>

The  lid is made from two fir 2×6 scraps and a redwood 2×4 scrap that John brought home from his job site.  Better than average specimens, with fairly straight, tight grain; they are probably from appearance grade stock.   I did not have a planer on hand, but they were pretty straight and flat.  I used my new jointer to make edges flat and perpendicular to the faces. I also used the jointer to clean up the faces. (This is usually accomplished by a planer) Then I glued and clamped them together as shown in this photo.

 

Read Full Post »

Custom TV Cabinet

We have started work on this avant-garde TV cabinet for a client in Alameda and are awaiting more sunshine to proceed. Please see this post for a 3d rendering of the piece.  I am looking forward to photographing the entire project when we go to install the piece in a few weeks. Stay posted!

Read Full Post »

Box corner jig

gluing up the prototype with box corners

Read Full Post »

This Cadillac Trash Can has a top shelf for plants, a shelf for holding tuna for the cat, and a space below to push the dog bowls out of the way. It is built from remnants, so I didn’t have complete control of the proportions: Richlite top, fir sides, plywood shelves, door, & back panel

Decorated with pencil and Bioshield Aqua Resin Trim Enamel (zero VOC and compostable)

The door flips open on and is held at the proper angle by rope salvaged from a sailboat. Small clothespins attach the bags to the door for easy access

Read Full Post »

They are made in New Zealand by Carbon Footprint Design

Unfortunately it would up the carbon footprint a bit to ship them across the Pacific.   I imagine that they are pretty lightweight though.

Read Full Post »

The As-built Floorplan

The Revised Floor Plan

This upgrade includes an expanded kitchen (for a client who enjoys cooking,) modern kitchen cabinets, a lot of drawers to maximize storage, New lighting design throughout the kitchen, foyer,  and living room, conversion of a large storage closet into a pantry and laundry room,  incorporation of a desk area into the kitchen, elimination of an electric fireplace with two-dimensional paper bricks and a new wall mounted flat screen TV with custom entertainment cabinet below.

Here are a few pictures of the kitchen before construction:

I am going to make you wait for the AFTER photos until it is finished,but here is a computer model of the new TV center to come:

Read Full Post »

« Newer Posts